Author: Editor

Agents’ Meeting 19 January 2018

We lay the foundations to build the future

The System Technology Agents Meeting was held on Friday 19 January 2018 at the spectacular location of IL CASTELLO DI SAN GAUDENZIO in Cervesina (PV).
A special occasion, a day of technical and commercial training, important exchanges of experiences and opinions by all the participating consultants from different areas of Italy.
A fundamental confrontation, heated but constructive and motivating discussions.
We analysed the current market situation and laid the foundations for a shared vision of scenarios and the objectives to be achieved and passed over the coming years, the result of excellent teamwork.

Villa Nemes – Studio Giordano Hadamik Architects

QUIN magazine article , 29 November December 2018

Proud to be a PARTNER of QUIN magazine for having contributed to the description of the intervention carried out, in the article relating to number 29 of November December 2018, of the project by Studio Giordano Hadamik Architects of Villa Nemes.The works carried out in the villa were:
Waterproofing of the underground structure and the pool through internal crystallization of the concrete using Cristal Mix and waterproofing of the roof slab using Poliuplan (thixotropic elastic polyurethane liquid membrane).

We thank Dr. Aldo Mazzolani of QUIN magazine for offering us this prestigious opportunity.

Article Smart Consolidation and waterproofing with plaster and additives and using Cristal Mix

Engineer Mirko Mordagà – Energy, Land Systems and Construction Engineering – University of Pisa.

https://www.ingenio-web.it/4098-consolidamento-e-impermeabilizzazione-con-betoncino-additivato

We want to thank engineer Mirko Mordagà for the professionalism and at the same time for the simplicity in the description of the restoration of infiltration problems of a retaining wall that is part of a historic building dating back to the medieval structure of a village in the province of Pisa, using concrete internal crystallization technology with the Cristal Mix product.

Article on the construction trade 7 August 2018

Article on the construction trade 7 August 2018

http://www.ilcommercioedile.it/system-technology-autosigillatura-del-calcestruzzo-con-cristallizzazione/

A special thanks goes to Dr. Francesca Malerba Editorial Director of Il Commercio Edile, for her collaboration, availability, kindness and for having chosen us for the publication of this article.
We have been recognised as interesting, innovative and professional.
This recognition must be shared, as always, with the whole System Technology team which, with commitment and dedication, allows us to receive thanks every day for the excellent work performed, commendations from customers and people involved in all the projects.
Once again, this gratification strongly encourages us to pursue a professional improvement through greater attention to customer satisfaction and the use of the latest generation technologies in solving construction site problems.

INJECT ACRYL ELASTIC R

CODE: 3001 R

The INJECT ACRYL ELASTIC R system is a non-toxic aqueous solution of multifunctional methacrylates.

DESCRIPTION

The compound gels in a few seconds to a few minutes when an activator or initiator is added just before use.
The final product is a soft and tacky cros-slinked gel.
In wet or dry conditions, the volume of the gel increases or decreases in a reversible manner assuring perfect waterproofing.

USE

The INJECT ACRYL ELASTIC R is used for sealing and consolidation works in presence of water.

The substance is injected through packers or injection hoses.
or injection hoses.

The low viscosity of the product assures high
fluidity.

It’s a hydrophilic system with a controlled set time used in the following applications:

  • Treatment of water infiltration and ground water ingress;
  • Treatment of soils;
  • Treatment of voids and cavities, in the form of sand grouts;
  • Injection of water bearing cracks in concrete or masonry walls;
  • Injection of (re-) injectable injection hoses;
  • Injection of compartments in (PVC) liners;

Data Sheet

INJECT ACRYL ELASTIC R

INJECT ACRYL B

CODE: 3001 B

The INJECT ACRYL B system is a non-toxic aqueous solution of multifunctional methacrylates.

DESCRIPTION

The compound gels in a few seconds to a few minutes when an activator or initiator is added just before use.

The final product is a soft, elastic and tacky crosslinked gel.

In wet or dry conditions, the volume of the gel increases or decreases in a reversible manner assuring perfect waterproofing.

USE

The INJECT ACRYL B system is used for sealing and consolidation works in presence of water.
The substance is injected through packers or injection hoses.
The low viscosity of the product assures high fluidity.
It’s a hydrophilic system with a controlled set time used in the following applications :

  • Treatment of water infiltration and ground water ingress;
  • Treatment of soils;
  • Treatment of voids and cavities, in the form of sand grouts;
  • Injection of water bearing cracks in concrete or masonry walls;
  • For grout injection hoses use the INJECT ACRYL ELASTIC R system.

Data Sheet

INJECT ACRYL B

POLIUPLAN

CODE: 3004

Thixotropic elastic liquid polyurethane membrane for continuous waterproofing.

DESCRIPTION

POLIUPLAN is a thixotropic and elastic single-component liquid polyurethane for waterproofing.

The material vulcanizes with atmospheric humidity.

It produces an elastic membrane with excellent adhesion to different surfaces.

Apply with roller, brush in one or two coats with a minimum total consumption of 1.0 – 1.2 kg/m2.

POLIUPLAN is recommended in applications with cracks in the substrate, thanks to its elongation capabilities combined with its low modulus properties.

The product is based on pure polyurethane and hydrophobic resins which provide it with excellent waterproofing properties.

The product IS NOT recommended for use where it is visible.

POLIUPLAN is effectively protected from UV rays by applying a thin layer of the already pigmented POLIUPLAN 500. POLIUPLAN RIV.

USE

  • Roofs waterproofing
  • Waterproofing of balconies, terraces and verandas
  • The POLIUPLAN waterproofed substrate can be left “exposed” or tiled with a C2TE class glue;
  • Waterproofing of damp areas in bathrooms, kitchens, balconies, auxiliary rooms, etc;
  • Waterproofing of old asphalt, EPDM/PVC and acrylic membranes.
  • Protection of polyurethane foam;
  • Waterproofing of bridges subjected to pedestrian and vehicle traffic;
  • Waterproofing of roof gardens, flower beds and pots;
  • Waterproofing and protection of concrete constructions such as bridges, tunnels, stadium stands, parking lots, etc;

Data Sheet

POLIUPLAN

CASE STUDIES

DOLCEDO (IM)

CAM, Marble Cutting Plant Basement

CUSANO MILANINO (MI)

Stelvio Street, Flat Cover

ALBISOLA MARINA (SV)

Via Poggio dell’Orizzonte, Terrace

ALBISOLA SUPERIORE (SV)

Via Mariconi, Residential building

ANDORA (SV)

Via Delle Patelle, Hanging Garden

ARENZANO (SV)

Pinewood, Planters

BERGEGGI (SV)

Via Della Ginestra, Residential building terrace

BERGEGGI (SV)

Via Torre D’Ere, Residential building

BOISSANO (SV)

Via delle Ginestre,Residential building terrace

BUSSANA (IM)

Via Castelletti, Apartment block flat roof

CELLE LIGURE (SV)

Ex Cinema, Terrace

CELLE LIGURE (SV)

P.zza Servettaz, Parking lot

CELLE LIGURE (SV)

Via Milano, Cantilevered parking system

CELLE LIGURE (SV)

Via Postetta, Solarium

CERIALE (SV)

Orchid Garden

CIRIE’ (TO)

Residential building, Terrace covering over membrane

COCCAGLIO (BS)

Via Esposito, Residential building

COGOLETO (GE)

P.zza Maggetti, Multi-level car park

DERNICE (AL)

Terrace, Residential Building

DIANO CASTELLO (IM)

Loc. Varcavello, Residential Building

DIANO MARINA (IM)

Via Della Rovere, Ecclesiastical Hostel Windowsills

DOGLIANI (CN)

Via Torino, Solarium swimming pool

GENOVA (GE)

Acquasola Park, Pond

IMPERIA (IM)

Via Dellebecchi

LANGUZZANO (PV)

MONTEBELLO DELLA BATTAGLIA (PV)

Via Famiglia Cignoli, Paving box

SAN SEBASTIANO CURONE (AL)

SANREMO (IM)

Solaro Sporting Club

POLIUPLAN LC

Code: 92

Liquid-applied polyurethane waterproofign membrane.

Description

POLIUPLAN LC is a premium, liquid and cold applied, one-part polyurethane
waterproofing membrane. It cures by reaction with ambient moisture to form
a strong protective and self-leveling base.
POLIUPLAN LC is based on LC-Technology, developed to avoid polymerization bubbles present in
traditional polyurethanes.
LC-Technology combines the best polyurethane properties with a system without bubbles and very low emissions.

Use

  • One component;
  • Odorless;
  • Neutral curing, does not stain, corrode or affect concrete
  • Liquid: easy to apply with professional or simple tools, like brush or roller;
  • Cold applied: in any situation and any climate;
  • Full surface adhesion and seamless covering, even on curved surfaces;
  • In combination with non-woven fabric is suitable to cover details, corners,edges;
  • Compatible with most building materials;
  • Easy to repair in case of damage;
  • Paintable;

Data Sheet

POLIUPLAN LC

Safety Data Sheet

POLIUPLAN LC

Documents