Category: SYNTHETICS

The accessories that cannot be missing

GIUX LITE

CODE: 5006

DESCRIPTION

The material of which the GIUX Lite profiles are made is high quality thermoplastic vinyl resins with the addition of a suitable plasticizer. 
It has a high resistance to the aggressive action of acid-alkaline solutions, ageing, brackish water with performance characteristics clearly superior to similar elements. Resistant to erosion caused by the sun, ozone and other atmospheric or chemical agents normally present in the air and groundwater. They are extremely flexible even at low temperatures. 
The mechanical characteristics remain unchanged over time.

USE

Waterstop in PVC is a highly elastic waterproof profile which is used in construction and expansion joints and in concrete structures, ensuring perfect hydraulic sealing and the capacity to absorb mechanical and natural stresses.


REFERENCES

CENIGA DI DRO (TN)

Edificio Residenziale

GIUX

CODE: 5005

Waterbar joint in PVC and hydrophilic rubber.

DESCRIPTION

GIUX is a coextruded PVC and hydrophilic rubber strip with a central bulb, designed to take maximum advantage of the combination of the two raw materials.

The hydrophilic rubber elements are covered with a protective tape to be removed just before casting, so as to avoid premature expansion.

It is suitable for use in contact with drinking water, sea water and in sewers.

USE

GIUX is used to waterproof expansion joints both below and above ground, both in slabs and between walls


REFERENCES

ALBISOLA MARINA (SV)

Via Ceramisti

CAGLIARI (CA)

Complesso Santa Gilla

STOPSTICK

CODICE:5002

STOPSTICK is a single component polyurethane sealant.

DESCRIZIONE

STOPSTICK is a high-quality, high-modulus single-component polyurethane sealant for a wide range of seals and adhesions.


STOPSAL

CODE: 5001

Hydrophilic polyurethane swelling profile for construction joints, suitable for saline water.

DESCRIPTION

The profile is made from 100% polyurethane. 

STOPSAL is supplied in blue with a retardant coating. 

STOPSAL is an expansion profile with an exceptional quality-price ratio.

USE

STOPSAL is an expanding hydrophilic polyurethane profile for waterproofing cast concrete joints (or in combination with bentonite matting or panels) or also for waterproofing prefabricated concrete elements. Suitable for salt water.

STOPSAL can be applied together with a hose for injection. For preventive or curative waterproofing with polyurethane injection resins.

Data Sheets


References

FORTE DEI MARMI (LU)

Via Matteotti

FUGA

CODE: 5003

Silicone waterproofing suitable for balconies and windows.

DESCRIZIONE

FUGA is the only silicone-based product that can boast the title of waterproofer. 

It is a concentrated solution of silicone resins, silanes, siloxanes and organic polymers, suitably catalysed, spread in a mixture of non-polar solvents, secondary alcohols and natural orange essence.

FUGA is used for waterproofing horizontal flat surfaces with macroporosity and fine cracks, eliminating water infiltrations, without having to resort to radical renovation of the walkable surfaces.

FUGA is therefore recommended for waterproofing terraces, balconies and horizontal and inclined surfaces but is also valid for vertical walls.

FUGA must be applied as is on clean and dry substrates, with temperatures between +10 and + 40°C.

UTILIZZO

  • Floors
  • Balconies
  • Terraces

FLUID GLASS

CODE: 5004

Product based on silicates in hydroalcoholic solution for the consolidation and protection of concrete.

DESCRIPTION

FLUID GLASS is a highly concentrated non-film impregnating product based on mineral silicates in hydroalcoholic solution.
It is therefore a reactive solution capable of forming, through chemical reaction with the calcium salts and hydrates present in the wall substrates, binding and stabilizing compounds; specific for consolidating treatments in green building interventions and in the restoration of period and monumental buildings.

USE

  • Consolidating agent for cement-based mortars and plasters;
  • Consolidating agent for concrete and reinforced concrete structures;
  • Consolidating agent/hardener, dustproofing, for concrete floors;
  • Curing aid, hardener for concrete surfaces;
  • Consolidating agent for cement block masonry;
  • Consolidating agent/regenerator for raw bricks;